Underwater Housing for the Sony ILCE-7M3K

This model carries an open price.
Now on sale
March 8, 2018 sale.

APSO-A73 is compatible with ILCE-7M3 and ILCE-7RM3.

【Standard Features】
Vari-angle grip is included as standard equipment. (The grip can be fastened the grip at the angle desired, e.g. vertical and horizontal.)
If you wish to use an extra wide port, such as an LB port, it is possible to design a port for use with a lens of φ110 exterior diameter.
The Flat cover (to be used with your choice of 3 INON viewfinders. Sold separately.)
16 body colors
Stock Colors : Black
Premium option color : Matte black (The surface has a high resistance to abrasion and a quality feel.)
An additional 14 colors are available on special order (Requires two extra weeks for production.) Violet, Red, Bright Yellow, Blue, Gray, Bronze, Green, Silver, Gold, Orange, Pink, Turquoise, Champagne, Light Green
Trigger type shutter lever
A zoom / focus knob
Mount Base (Can be fitted with an adaptor to fit five types of couplings: a X2 shoe base adaptor, a multi-direct base, a direct base, a T-slide base, a ball joint M10)
M10 Spacer *2
Star Dial 2 (an original feature allowing easy manipulation even with thick diving gloves)
Sync Cord Adaptor (7mm diameter *2 For SEA&SEA)
Two INON strobes can be attached to one two-hole rubber bushing from INON (one included in package) (With an additional two-hole rubber bushing you can attached a total of four INON strobes.)
A secure double O-ring seal on the cover (oil container)
Moving parts are all sealed with double O-rings.
A button shaft is polish finishing
The body is constructed of corrosion-resistant aluminum; the grip is die-cast; neoprene rubber; buttons and screws are stainless steel; the window is polycarbonate.
Rated for a diving depth of 75-100m (Proper functioning of the unit cannot be guaranteed at these depths.)(Depends on the Dome Port.)
Size: W317*H179*D190 (Including Body + Slant Cover, Grip, and Finder)
Weight on land: Approx. 2190g (Including Body + Slant Cover and Grip, not including Finder)
Weight (underwater): Approx. 90g (Including Body + Slant Cover, Grip, 90M Port, camera, battery and E90Macro)
Functions between 0°C + 40°C / 32°F - 104°F
User Manual
Comes with one two-hole rubber bushing for a sync cord
Spare O-ring
O-ring grease
Slant Cover (to be attached to the tilt monitor.)
 Comes with a lever to adjust the angle.
Monitor hood rail (only for the slant cover, and needs no metal mounting bracket)
 (Can also be fitted with the PRO MARK II UNZ-2603 underwater monitor by UN and the Monitor Hood PRO.)
φ170 Dome LB (with a shade)
E1224G Extension LB (For SEL1224G)
E2470G Extension LB (For SEL2470GM)
E1635G Extension LB (For SEL1635GM)
Adjustable grip (with attachment part)
2870 Port LB (For SEL2870)
1635 Extension LB (For SEL1635Z, for INON Dome Port II Protector II SET)
1635 Extension LBLB (For SEL1635Z, for ACQUAPAZZA 170 Dome PortLB)
2470 Extension LB (For SEL2470Z)
16FC Extension LB
E90M Port LB
S150M Port LB (Requires the mount adaptor LA-EA3)
S180M Port LB (Requires the mount adaptor LA-EA3)
Various F Gears (For focus)
Various Z Gears (For zoom)
MF Band A (S2870, 1635, 2470 in common)
M10 Ball Joint L60
M10 Ball Joint L80
M67 Flip lens adapter
Premium Color Matte black (Body + Cover)
Premium Color Matte black (Port and Extension)
The INON 45° viewfinder unit for the X-2
(Can only be attached to a flat cover. The straight viewfinder unit for the X-2 will result in slight vignetting.)
The INON viewfinder window unit for the X-2
(Can only be attached to a flat cover. Other viewfinders will not work with the X-2.)
Download System Chart
Slant Cover
(Sold separately at the time of order. Difference in price.)
Works with the NEX Tilt Monitor.
While underwater the user can arbitrarily change the monitor angle anywhere from 0 ° to 45 °. When looking up in the water, use the 0 ° setting; when shooting downwards, change to the 45 ° setting.
Vari-angle grip
The grip angle can be adjusted between 0 ° to 60 °, vertical, or horizontal.
However when it is 0°- 60°angle, it becomes difficult to access the button and dial.
Connecting an external battery
It can take a video for a longer time when connected to the external battery instead of the original strobe with micro USB. Both ends of Micro USB cable are ‘L-shaped’.
TTL shooting
It can do an accurate TTL shooting by using the original external strobe by Sony.
Movie ON/OFF Lever
The lever can be used the upper pull lever or the lower push lever depending on the angle of grip.
Clamp ring system’s Gear
The zoom gear and the focus gear are the clamp ring system. There is no slip depending on lens individual differences because it can be adjusted as you like.
External strobe power lever
It is possible to turn ON/OFF the genuine strobe HVL-F20M from the outside.
φ10 push buttons
As pushing a button of φ8mm while underwater can cause pain to your finger, the buttons have been enlarged. The buttons have also been moved farther apart. The button that is close to the wall and hard to push is angled.
Controls are sealed by two sliding O-rings.
The mount port, the gear knob, the push buttons, the focus Knobs and the star-dials etc. are sealed by two sliding O-rings.
The shaft has a polished finish.
Beginning with the first model ever sold, the APSG-DP2, ACQUAPAZZA has polished finishing all their shafts.
Double-sealed opening
The horizontal O-ring can be flooded just by floating a little. However, even if there is a gap of 1mm between body and cover, the vertical O-ring will not flood. ACQUAPAZZA has succeeded in developing the stronger double-sealed opening. Regular maintenance assures you of even more worry-free photography.
Use at water depth of 0-100m
It is developed to be used at a water depth of no greater than 100m and all elements considered.
It goes without saying that the housing has high strength, and the sliding O-rings are all double-sealed.
Flat cover
Both the INON 45° viewfinder unit for the X-2 and the INON viewfinder window unit for the X-2 are attachable.
M14/M16 Accessory Ports
There are two accessory ports in the housing. The M14 ports allow communication between the camera and the strobes. (Bulkhead connectors sold separately.) The ports on the M16 also allow connection of an exterior monitor. (You will need an L-shaped HDMI sync cord, an exterior monitor (from SHOGUN), and an underwater housing for the monitor(also from SHOGUN).. Available from other companies at separate cost.)
Large aperture LB port
The ports of the external lens diameter can be designed up to φ110. Therefore 180mmMacro and SELP28135G can be used. (Built-to-order)
Desorb a camera in a single operation
It is possible to desorb a camera in a single operation even if it is SELP28135G of φ105.
Choose an optical finder
You can choose which viewfinder you want for your flat back cover. (However, if at the time of construction of your order stock is unavailable, we will not be able to meet your request.) You can equip with 45° View Finder Unit for X-2 or Finder Window Unit for X-2 of INON. (The straight viewfinder unit will result in slight vignetting. Other viewfinders will not work with the X-2.) (To install the viewfinder, a special securing ring for an INON viewfinder unit must be sent separately.)
Tripod Screw
To be able to use a tripod underwater, there are two places to insert a tripod screw. This is very handy for static shooting or for motion capture.
Comes in 16 colors
Stock Colors: Black
Color options (Requires an additional two weeks.):
Violet、Red、Bright Yellow、Blue、Gray、Bronze、Green、Silver、Gold、Orange、Pink、Turquoise、Champagne、Light Green
Matte Black is the premium color option.
Monitor Hood Rail
The hood is fully capable of shading a monitor when the sea is bright, and can be removed with just a touch when it is not needed. It also has a magnifying effect and is very popular with those who have trouble discerning small objects on the monitor screen. (Can be attached to the PT-EPO1 by UN, Inc.)