Underwater Housing for the Sony ILCE-6500
This model carries an open price.
Now on sale
May 2017 sale.
”4D focus” system progressed even more.
The fastest response in the world of 0.05 seconds is actualized.
Shooting 4K videos condensed pixels correspond to 6K and 425 Phase-Detect Points AF Sensor is possible.
It has 3.5 times original battery life as adding a commercial mobile battery.
- 【Standard Features】
- The flat cover
- Three in stock colors : Black, Red, Turquoise
- An additional 13 colors are available on special order :Violet, Bright Yellow, Light Green, Gray, Bronze, Green, Silver, Gold, Orange, Pink, Blue, Champagne, Matt Black (Requires two extra weeks for production.)
- M14 accessory port (can be use the air lock system and Nikonos5 pin connection)
- M16 accessory port (can be use the air lock system and Nikonos5 pin connection)
- A secure double O-ring seal on the back door
- The arranged angle of button (allowing easy manipulation even with thick diving gloves)
- 2-M3 screw (directly set up the micro flex arm of RG Blue)
- Monitor hood rail (The PRO MARKII UNZ-2603 underwater monitor by UN can be attached.)
- Mount Base of the center (Can be fitted with an adaptor to fit five types of couplings: a X2 shoe base adaptor, a multi-direct base, a direct base, a T-slide base, a ball joint M10)
- Installation Holes for the M10 (For the ball joint base M10)
- Optical fiver Adaptor (for use with four strobes from INON, Inc if and only if add a optical fiber rubber bush a two-hole rubber bush unit for fiber optic sync cords ) (for use with two strobes from either Olympus or Sea & Sea)
- Star Dial (an original feature allowing easy manipulation even with thick diving gloves)
- Three tripod screws
- On-off lever for internal strobe
- Three holes for strap attachment
- Mobile Battery Space (Fits a t8*98*68 mobile battery.) (We recommend dodocool Power Bank DP08 with CE mark.) (It needs a less than 20cm extension cable or micro USBL.)
- Body construction: milled in 3D of corrosion-resistant, high quality solid aluminum.
- The body is constructed of corrosion-resistant aluminum, buttons and screws are stainless steel, the window is polycarbonate.
- Size: W201.0*H136.0*D110.0 (measuring only the housing body, with a flat cover (thick) and including any protruding points)
- Weight on land: Approx. 1143g (Including Body and Slant cover)
Weight (underwater): Approx. 220g (Including Body, Slant cover, Z12 Extension, Dome Port 115, Camera and Tounit 2.8/12) - Functions between 0°C + 40°C / 32°F - 104°F
- Pressure tested to 100m / 328.08ft
- 【Accessories】
- User Manual
- A two-hole rubber bushing for a sync cord
- Hand strap
- Spare O-ring
- O-ring grease
- 3 M3-screw
- 【Options】
- The slant cover
- Premium Color Mat black (The surface has a high resistance to abrasion and the feel of quality.)
- Flip lens adapter M67 (using the M67 standard lens in the port with M67 screw)
- Flip lens adapter P (using the M67 standard lens in the 30M, 2870, and 1650 port)
- Adjustable grip M (Tray by Base GM and Grip M（1 or 2）)
- M10 Ball Joint L60
- M10 Ball Joint L80
- AMRS: the focus ring and zoom ring allow underwater operation as easy as above water operation (INON, Inc. patented magnetic rotary system)
- AMRSO
- AMRSI
- Various Port
- Various Extension
- Various Z/F Gear
- MF Band A
- Projecting Diffuser (not to vignette when using the internal strobe)
- Body Cap (is used when carry without port)
- Rear Cap (protect a mounting portion of body)
- apsoa6500_sc（673hB）
- Flat cover (Standard Features)
- If you use only wide, the flat cover is the best.
- Slant Cover (Option)
- Works with the Tilt Monitor.
While underwater the user can arbitrarily change the monitor angle from 3° to 45°. When looking up in the water, use the 3° setting; when shooting downwards, change to the 45° setting.
- SEL90M28G、To unit 2.8/12 can be removed with just a touch
- They can be removed with just a touch, because the diameter of SB port (M86 port) is large.
Removing a lens from a camera like other company’s one, removing a port from housing, attaching a lens from outside of housing, and attaching a port…
It doesn’t need labor. (Remove only a port when attach the MF band A to SEL90M28G)
- M14/16 Accessory Ports
- The accessory ports allow Nikins-5-communication between the camera and the strobes. (Bulkhead connectors sold separately.) Or it allows connection of the air lock system of other companies.
- Mobile Battery Space
- When putting a flat mobile battery, it has 3.5 times original battery life.
There is the space that fits a t8*98*68 mobile battery.
(We recommend dodocool Power Bank DP08 with CE mark.)
(It needs a less than 20cm extension cable or micro USBL.)
- φ8mm push buttons
- Pushing a button of φ6mm while underwater can cause pain to your fingers so we have enlarged the buttons. We have also moved the buttons farther apart. Those buttons that were too close to the wall and difficult to push have been moved slightly.
- Flip Lens Adapter M67/P
(Options) - It’s the adapter that desorbs the close-up lens of standard M67 in a flash. M67 can be used other company’s ports has M67 screw. P used exclusively for the port with the large objective glass of ACQUAPAZZA.
- Mounting base
- Can be attached to 5 types of adapters. : Shoe base adapter X-2, Multi-direct base, Direct base, T slide base, Ball joint base M10.
- M3 screw for the micro flex arm
- It has 2-M3 screw directly set up the micro flex arm of RG Blue.
- Installation Holes for the M10
- (For the ball joint base M10) Even without a grip attached to the housing, with these a hole it is possible to attach a compact strobe, a video light or a mixture of both. And if you do have a grip attached, it’s a breeze to connect four light sources.
- Monitor Hood Rail
- (The PRO MARKII UNZ-2603 underwater monitor by UN can be attached.) The hood is fully capable of shading a monitor when the sea is bright, and can be removed with just a touch when it is not needed. It also has a magnifying effect and is very popular with those who have trouble discerning small objects on the monitor screen.
- Projecting Diffuser
(Optional) - For use with an internal strobe (for the 1650 port and 30M port) Even when the subject is 0mm from the objective lens glass, light can curve around and cause no vignetting. The projecting portion of the diffuser can be adjusted to different lengths, which helps to block the curve of the light.
- Port for the E-mount Lens
(Options) - The material of the object lens is particular about that it is the glass. When ordering both of body and port together, it is almaited together. So it will be same color.
When you order an adding port and want same color with body, it needs 2 weeks to almite. And they might have a little different color in the point of tone, consistency and brightness since they are different process.
8 Extension and Z12 Extension are only black, because they are small.
Please contact us directly about the A mount port that is published on the system chart of APSO-A6300 and not here.
